Table of Contents
Advertisement
Configuring firmware
3.8 "Exit" tab
3.8
"Exit" tab
Exit Setup Utility. You have the following options for saving or discarding the changes you
made:
Calling "Exit"
Choose: "Setup Utility (Page 10)" > "Exit".
Firmware setting
Exit Saving Changes
Save Change Without Exit
Exit Discarding Changes
Load Optimal Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Save setup settings to file
Load setup settings from file
30
Meaning
All changes are saved.
The device is restarted with the changed firmware settings.
All changes are saved.
Setup utility remains open.
Setup Utility is closed.
All changes are discarded.
The firmware settings are reset to the safe default values.
The delivery state is restored.
NOTICE:
All current firmware settings are overwritten.
The user-specific profile with the user-specific firmware settings is loaded.
Requirement:
The firmware settings were previously saved as user-specific profile with "Save
Custom Defaults".
NOTICE:
All current firmware settings are overwritten when loading the user-specific profile
with "Load Custom Defaults".
The current firmware settings are saved as a user-specific profile (see also "Load
Custom Defaults").
All changes to the firmware settings are discarded.
The current firmware settings are written to a file.
Firmware settings are loaded from a file.
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Advertisement
Table of Contents
