Table of Contents
Advertisement
3.4.3
"Video Configuration"
Calling "Video Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "Video Configuration".
Firmware
setting
Primary Display
PEG Slot
PCH PCIE
The following option shows only when "Primary Display" = "IGFX".
Primary display
of onboard DPs
DPP(X70)
DPP(X71)
3.4.4
"VMD Setup"
Calling "VMD setup menu"
This configuration is only available for SIMATIC IPC BX-59A.
Select: "Setup Utility (Page 10)" > "Advanced" > "VMD setup menu".
Firmware setting
Enable VMD
controller
Note
Configure SSD or M.2 devices in onboard RAID system
When VMD controller is enabled, the connected SSD or M.2 devices will not be present in M.2
Configuration or SSD Configuration in Advanced tab.
You can configure the connected SSD or M.2 devices in onboard RAID system through: Front
Page -> Device Management -> Intel® Rapid Storage Technology.
More details about how to operate and configure RAID system, refer to section Operating the
device -> Operating RAID systems in SIMATIC IPC BX-56A and SIMATIC IPC BX-59A Operating
Instructions.
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Value
Setting in
delivery state
BX-56A BX-59A
Auto
x
IGFX
Auto
x
Value
Setting in
delivery state
BX-59A
Enable
Disable
x
x
Select which IGFX/PEG Graphics device should be Primary
Display.
x
Select the IGFX prime display port.
Enable VMD controller.
Disable VMD controller.
Configuring firmware
3.4 "Advanced" tab
Meaning
Meaning
13
Advertisement
Table of Contents
