Table of Contents
Advertisement
Important information
Basic knowledge requirements
This firmware / BIOS description is intended for the following qualified personnel:
• Programmers and testers who commission the device themselves and connect it to an
automation system.
• Service and maintenance technicians who install enhancements or conduct fault analysis.
A solid background in personal computers is required to understand this manual. General
knowledge in the field automation control engineering is recommended.
Scope of validity
This firmware/BIOS description applies to the following SIMATIC IPCs:
• SIMATIC IPC BX-56A
• SIMATIC IPC BX-59A
History
The following versions of this firmware/BIOS description have been published previously:
Edition
10/2023
Firmware/BIOS
The firmware (BIOS) is located in a FLASH block on the motherboard.
The firmware selection menu can be opened after the device has been started. You can then
configure the firmware settings of your device.
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Comment
First Edition
3
Advertisement
Table of Contents
