Active Management Technology Configuration; Hardware Monitor - Siemens SIMATIC IPC BX-56A Operating Instructions Manual

Configuring firmware
3.4 "Advanced" tab
3.4.5

"Active Management Technology Configuration"

Configure remote management.
This configuration is only available for SIMATIC IPC BX-59A.
Calling "Active Management Technology Configuration"
Select: "Setup Utility (Page 10)" > "Advanced" > "Active Management Technology
Configuration".
Firmware setting
AMT BIOS
Features
AMT Configuration
USB Provisioning
of AMT
Unconfigure ME
3.4.6

"Hardware Monitor"

Calling "Hardware Monitor"
Select: "Setup Utility (Page 10)" > "Advanced" > "Hardware Monitor".
Voltage
+1.8V
+3.3V
RTC
+1.05V
Temperature
CPU Temperature
System Temperature
Fan Speed
FAN1
FAN2
EM-FAN1
EM-FAN2
14
Value Setting in
delivery state
BX-59A
Enable x
Disable
Enable
Disable x
Firmware setting
Enable AMT (Active Management Technology) BIOS Features.
Disable AMT BIOS Features. When disabled, you cannot access to
MEBx setup anymore.
Enable AMT USB Provisioning.
Disable AMT USB Provisioning.
When selected, you can reset all MEBx values to default values.
[Voltage value]
[Voltage value]
[Voltage value]
[Voltage value]
[Temperature value]
[Temperature value]
[Rotate speed]
[Rotate speed]
[Rotate speed]
[Rotate speed]
Firmware/BIOS description (SIMATIC IPC BX-56A, IPC BX-59A)
Operating Instructions, 10/2023, A5E52427534-AA
Meaning
Value