Table of Contents
Advertisement
Features of your vehicle
head-up display height to the desired
position.
3. Hold the button (1 or 2). The system
will beep once and notify you 'Driver 1
(or 2) settings saved' will appear on
the infotainment screen.
Recalling memory positions
1. Shift to P (Park) while the EV button is
in the ON position.
2. Press the desired memory button (1 or
2). The system will beep once, and
then the driver's seat position, outside
rearview mirror position, steering
wheel (if equipped) position and
head-up display (if equipped) height
will automatically adjust to the stored
positions.
3. 'Driver 1 (or 2) settings applied' will
appear on the infotainment screen.
NOTICE
僅 In order to adjust the memory button
(2) while adjusting the memory button
(1), press the memory button (1) to
pause the adjustment of (1), then
press memory button (2).
僅 If you adjust the seat, outside rear -
view mirror, head-up display (if
equipped), steering wheel (if
equipped) while recalling the stored
positions, the manually adjusted set -
tings will be applied.
Resetting memory positions
If the Driver position memory system
does not work properly, initialize the sys -
tem as follows.
Driver Position Memory System
Resetting the integrated memory
system
1. Stop the vehicle and open the driver's
door with the EV button in the ON
position and the vehicle shifted to P
(Park).
2. Adjust the driver's seat and seatback
to the forward most position.
3. Press the memory button 1 (or 2) and
push forward the driver's seat move -
ment switch for over 2 seconds simul -
taneously.
While resetting the integrated
memory system
1. Resetting starts with a notification
sound.
2. The driver's seat and seatback are
adjusted to the rearward position with
the notification sound.
3. The driver's seat and seatback are re-
adjusted to the default position (cen -
tral position) with the notification
sound.
However, in the following cases, the
resetting procedure and the notification
sound may stop:
僅 The memory button is pressed.
僅 The seat control switch is operated.
僅 The gear is shifted out of P (Park).
僅 The driving speed exceeds 3 km/h (2
mph).
僅 The driver's door is closed.
NOTICE
僅 While integrated memory system is
being reset, if the resetting and notifi -
cation sound stops incompletely,
restart the resetting procedure again.
僅 Make sure that there are no objects
around the driver's seat in advance of
5
5
35
Advertisement
Chapters
Table of Contents
