Table of Contents
Advertisement
Driver assistance guide
Blind-Spot Collision-Avoidance
Assist malfunction and limitations
Blind-Spot Collision-Avoidance
Assist malfunction
When Blind-Spot Collision-Avoidance
Assist is not working properly, the warn -
ing message will appear on the cluster
for several seconds, and the master ( )
warning light will appear on the cluster.
Warning message: Check Driver
Assistance system.
If this occurs, have Blind-Spot Collision-
Avoidance Assist be inspected by a pro -
fessional workshop. Visit an authorized
Kia dealer.
Warning message: Check side view
mirror warning light
When the outside rear view mirror warn -
ing light is not working properly, the
warning message will appear on the
cluster for several seconds, and the
master ( ) warning light will appear on
the cluster. If this occurs, have Blind-
Spot Collision-Avoidance Assist be
inspected by a professional workshop.
Visit an authorized Kia dealer.
Blind-Spot Collision-Avoidance
Assist disabled
Covering the rear bumper around the
rear corner radar or sensor with foreign
materials, such as snow or rain, or
installing a trailer or carrier can reduce
the detecting performance, resulting in
Blind-Spot Collision-Avoidance Assist
temporarily limited or disabled.
At this time, the warning message and
master warning light ( ) are displayed
on the cluster display, but it does not
indicate a malfunction of Blind-Spot Col -
lision-Avoidance Assist.
Blind-Spot Collision-Avoidance Assist (BCA)
Warning message: Driver Assistance
system limited. Radar blocked.
Blind-Spot Collision-Avoidance Assist
will operate properly when such foreign
material or trailer, etc., is removed, and
then the vehicle is restarted.
If Blind-Spot Collision-Avoidance Assist
does not operate properly after it is
removed, have Blind-Spot Collision-
Avoidance Assist be inspected by a pro -
fessional workshop. Visit an authorized
Kia dealer.
WARNING
僅 Even though the warning message
does not appear on the cluster, Blind-
Spot Collision-Avoidance Assist may
not properly operate.
僅 Blind-Spot Collision-Avoidance Assist
may not properly operate in an area
(for example, open terrain) where any
objects are not detected right after
the vehicle is turned on, or when the
detecting sensor is blocked with for -
eign material right after the vehicle is
turned on.
CAUTION
Turn off Blind-Spot Collision-Avoidance
Assist to install or remove a trailer, car -
rier, or another attachment. Turn on
Blind-Spot Collision-Avoidance Assist
when finished.
NOTICE
You can check it in the service message
of the utility information view of the clus -
ter display window.
7
7
37
Advertisement
Chapters
Table of Contents
