Kia EV9 2024 Manual page 210

Features of your vehicle
Link Buttons" section and start over).
Refer to "1) Erasing and Reprogram -
ming a Single HomeLink씾 Button:" on
page 5-75
OMV033473N
2. Position the garage door opener
remote 2~8 cm (1~3 inches) away
from the HomeLink buttons.
OMV033474N
3. While the HomeLink indicator light (7)
is flashing orange, press and hold the
hand-held remote button. Continue
pressing the hand-held remote button
until the HomeLink indicator light (7)
light changes from orange to green.
You may now release the hand-held
remote button. The garage door will
move.
4. Wait until your garage door comes to
a complete stop, regardless of posi -
tion, before proceeding to the next
steps.
5. Press and release the HomeLink but -
ton you are programming and
observe the indicator light.
僅 If the indicator light remains solid
green, your device should operate
when the HomeLink button is
pressed. If your device operates,
programming is complete.
僅 If the indicator light rapidly flashes
green, firmly press, hold for two
5 72
seconds and release the HomeLink
button up to three times to com -
plete the programming process. Do
not press the HomeLink button rap -
idly. If your device operates, pro -
gramming is complete. If the device
does not operate, continue with
step 6.
6. At the garage door opener motor,
(security gate motor, etc.) locate the
"Learn", "Smart", "Set" or "Program"
button. This can usually be found
where the hanging antenna wire is
attached to the motor-head unit (see
the device's manual to identify this
button). The name and color of the
button may vary by manufacturer.
OCV041606N
* A ladder and/or second person may
simplify the following steps.
7. Firmly press and release the "Learn"
,"Smart", "Set" or "Program"" button.
You now have up to 30 seconds in
which to complete the next step.
8. Return to the vehicle and firmly press,
hold for two seconds and release, the
HomeLink button up to three times.
Do not press the HomeLink button
rapidly. As soon as you see the garage
door start to move, stop pressing any
buttons until a few seconds after the
garage door has come to a complete
Mirrors