Driver Position Memory System; 僅 Recalling Memory Positions; 僅 Driver Position Memory System Reset; 僅 Easy Access Function - Kia Sportage 2024 Owner's Manual

Features of your vehicle
4. "Settings 1 (or 2) saved" will appear on
the LCD display.
Recalling memory positions
1. The ignition switch or ENGINE START/
STOP button is in the ON position.
2. Press the desired memory button (1 or
2). The system will beep once, and
then the driver's seat position, instru -
ment panel illumination intensity will
automatically adjust to the stored
positions.
3. "Settings 1 (or 2) applied" will appear
on the LCD display.
僅 While recalling the "1" memory posi -
tion, pressing 1 button temporarily
stops the adjustment of the recalled
memory position. Pressing the 2 but -
ton recalls the "2" memory position.
僅 While recalling the "2" memory posi -
tion, pressing the SET or 2 button
temporarily stops the adjustment of
the recalled memory position. Press -
ing the 1 button recalls the "1" memory
position.
僅 While recalling the stored positions,
pressing one of the control buttons
for the driver's seat, outside rear view
mirror, or instrument panel illumina -
tion will cause the movement of that
component to stop and move in the
direction that the control button is
pressed.

Driver position memory system

reset
If the Driver position memory system
does not work properly, initialize the sys -
tem as follows.
How to initialize:
1. Stop the vehicle and open the driver's
door with the ignition switch or
ENGINE START/STOP button in the
Driver Position Memory System
ON position and the vehicle shifted to
P (Park).
2. Pull the driver's seat forward as far as
possible and have the seatback
upright as much as possible using the
driver's seat forward/backward
adjustment and seatback angle
(recline) switches.
3. Push the SET button and seat forward
movement switch for 2 seconds
simultaneously.
Initialization in the process:
1. Initialization begins as the alarm
sounds.
2. The seat and seatback will automati -
cally move backwards. The alarm
sound will continue while the system
is in operation.
3. Initialization will be complete after the
seat and seatback move to the center
with an alarm sound.
If, however, cases as follows occur, the
initialization process will come to a stop
and the alarm sound will stop as well.
僅 When pushing driving position mem -
ory system button
僅 When pushing driver's seat height
adjustment switch
僅 When shifting from P (Park) to other
positions
僅 When driving speed exceeds 2 mph (3
km/h)
僅 When the driver's door is closed
Easy access function
The system will move the driver's seat
automatically as follows:
With smart key system
僅 It will move the driver's seat rearward
when the ENGINE START/STOP but -
ton is in the OFF position and the
driver's door is opened.
4
4 21