Connecting To The Firebox As A Wireless Guest; Configuring The Wireless Card On Your Computer - Watchguard Firebox X15 User Manual

external network. This option is selected by default so that all
guest users have access to the Internet.
Guests can access the Trusted Network
Select this check box to allow guest users to use resources on the
trusted network protected by the Firebox X Edge.
Guests can access VPN
Select this check box to allow guest users to access VPN tunnels
through the Firebox X Edge.
WebBlocker Profile
If you use WebBlocker, the options in this drop-down list control
the types of web sites guest users can get access to through the
Firebox X Edge. You can apply any existing WebBlocker profile to
guest users. If this option is set to No WebBlocker, all guest
users have full access to all web sites.

Connecting to the Firebox as a wireless guest

To log on as a wireless guest user, a user must open their Web
browser and do one of these procedures:
• Type https:// in their browser address bar, and the IP address
of the Edge trusted interface.
The default URL is: https://192.168.111.1
• Try to get access to any HTTP Web site on the Internet. The
Firebox X Edge will automatically redirect the user to the login
Web page.
The Firebox will not automatically redirect a user who tries to
get access to an HTTPS Web site.
The user must type "guest" as the user name. If password protection
is not required, the user does not have to type a password in the
password text box. They can keep the text box blank and click OK.

Configuring the Wireless Card on Your Computer

These instructions are for the Windows XP with Service Pack 2 oper-
ating system. To see the installation instructions for other operating
systems, go to:
http://www.watchguard.com/support/sohoresources/
User Guide
Configuring the Wireless Card on Your Computer
101