Watchguard Firebox X15 User Manual page 215

3
Below the Microsoft manufacturer, select the File and Printer
Sharing for Microsoft Networks network service and click OK.
Installing the Client for Microsoft Networks
From the connection window Networking tab:
1 Click Install.
The Select Network Component Type window appears.
2
Double-click the Client network component.
The Select Network Protocol window appears.
3
Select the Client for Microsoft Networks network client and
click OK.
Configuring the WINS and DNS settings
The remote computer must be able to connect to the WINS and DNS
servers. These servers are on the trusted network of the Firebox X
Edge.
From the connection window Networking tab:
1
Select the Internet Protocol (TCP/IP) component and click
Properties.
The Internet Protocol (TCP/IP) Properties window appears.
2
Click Advanced.
The Advanced TCP/IP Settings window appears.
3
Click the DNS tab and from the section labeled DNS server
addresses, in order of use, click Add.
The TCP/IP DNS Server window appears.
4
Type the IP address of the DNS server and click Add.
To add more DNS servers, repeat steps 3 and 4.
The DNS server on the private network of the Firebox X Edge must
be the first server in the list.
5
Select the Append these DNS suffixes (in order) radio button
and click Add.
The TCP/IP Domain Suffix window appears.
6
Type the domain suffix in the applicable field and click Add.
To add more DNS suffixes, repeat steps 5 and 6.
7
Click the WINS tab. From the section WINS addresses, in order
of use, click Add.
The TCP/IP WINS Server window appears.
User Guide
Preparing Remote Computers for MUVPN
N
OTE
201