Watchguard Firebox X15 User Manual page 63

2
From the navigation bar, select Administration > WSM Access.
The WatchGuard System Manager Access page appears.
3
Select the Enable remote management check box.
4
From the Management Type drop-down list, select WatchGuard
Management System.
5
Make sure the Use Centralized Management check box is
cleared.
WatchGuard System Manager v8.0 and 8.1 do not support centralized
Edge management.
6 Type a status passphrase for your Firebox X Edge and then type
it again to confirm in the correct fields.
7
Type a configuration passphrase for your Firebox X Edge and
then type it again to confirm in the correct fields.
These passphrases must match the passphrases you use when you
add the device to WatchGuard System Manager or the connection
will fail.
8
In the Management Server Address text box, type the IP
address of the Management Server if it has a public IP address.
If the Management Server has a private IP address, type the
User Guide
Setting up WatchGuard System Manager Access
N
OTE
49