Chapter 2 Installing The Firebox X Edge; Installation Requirements - Watchguard Firebox X15 User Manual
Firmware version 7.5 all firebox x edge standard and wireless models
Hide thumbs
Also See for Firebox X15:
- User manual (310 pages) ,
- Quick start manual (2 pages) ,
- Reference manual (264 pages)
Table of Contents
Advertisement
Installing the Firebox X Edge
•
A power cable clip
Use this clip to attach the cable to the side of the Edge. It decreases the
tension on the power cable.
•
One straight-through Ethernet cable
•
A wall mount plate (Wireless models only)
•
Two antennae (Wireless models only)
Installation Requirements
The Firebox® X Edge installation requirements are:
•
A computer with a 10/100BaseT Ethernet network interface
card to configure the Firebox.
•
A Web browser. You can use Netscape 7.0 (or later), Internet
Explorer 6.0 (or later), or an equivalent browser.
•
The serial number of the Firebox X Edge.
You can find the serial number on the bottom of the Firebox. You use
the serial number to register the Edge.
12
WatchGuard Firebox X Edge
Hide quick links:
Advertisement
Table of Contents
