Enable A Wireless Guest Network Manually - Watchguard Firebox X15 User Manual

Enable a wireless guest network manually

You can also use the wireless guest network configuration wizard available on the Wizards page of
your Edge configuration menu.
1. To connect to the System Status page, type
of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2. From the navigation bar, select Network > Wireless Guest.
3. On the Settings tab, select the Enable Wireless Guest Network check box to allow wireless
connections through the Edge to the Internet according to the rules you have configured for outgoing
access on your Edge. These computers have no access to computers on the trusted or optional
network.
4. The Edge must assign the wireless guest network and IP address and subnet mask. The default IP
address is 192.168.113.1. It is not necessary to change this IP address unless you already use the
192.168.113.0/24 network address on devices configured as part of your trusted or optional network.
If you do, then you must select a different private IP address that is not already in use on one of your
networks.
User Guide
in the browser address bar, and the IP address
https://
Wireless Setup
111