Installing the
CHAPTER 2
Firebox X Edge
To install the WatchGuard® Firebox® X Edge in your network, you must
complete these steps:
•
Identify and record the TCP/IP properties for your Internet
connection.
•
Disable the HTTP proxy properties of your Web browser.
•
Connect the Firebox X Edge to your network.
•
Connect your computer to the Edge.
•
Use the Quick Setup Wizard to configure the Edge.
•
Activate the LiveSecurity® Service.
Package Contents
Make sure that the package for your Firebox® X Edge includes these
items:
•
The Firebox X Edge QuickStart Guide
•
A LiveSecurity® Service activation card
•
A Hardware Warranty Card
•
An AC power adapter (12 V)
User Guide
11