Watchguard Firebox X15 User Manual page 171

To configure WebBlocker:
1
To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select WebBlocker > Settings.
The WebBlocker Settings page appears.
3 Select the Enable WebBlocker check box to turn on the
WebBlocker feature.
4
Type a password in the Full Access Password field.
The full access password gives access to all web sites until the inactivity
timeout is reached or until an authenticated user logs out.
5
Type the same password again in the Confirm Password field.
6
Type a number, in minutes, in the Inactivity Timeout field.
The Inactivity Timeout shows the length of time the Full Access Password
is active if no web browsing is done. If a user types the Full Access
Password and no HTTP traffic is done from that user's computer for the
length of time set in the Inactivity Timeout, WebBlocker rules start
again. The value can be from 1 to 1440 minutes.
User Guide
Configuring Global WebBlocker Settings
157