Enable Remote Management With Wsm V7.3 Or Earlier - Watchguard Firebox X15 User Manual

Configuration and Management Basics
public IP address of the Firebox protecting the Management
Server.
The Firebox protecting the Management Server automatically monitors
all ports used by the Management Server and will forward any
connection on these ports to the configured Management Server. No
special configuration is necessary for this to occur.
9
Type the Client Name to give your Firebox X Edge.
This is the name used to identify the Edge in the Management Server.
10 Type the Shared Key.
The shared key is used to encrypt the connection between the
Management Server and the Firebox X Edge. This shared key must be the
same on the Edge and the Management Server. You must get the shared
key from your VPN administrator.
11 Click Submit.

Enable remote management with WSM v7.3 or earlier

Follow these instructions to configure remote access from Watch-
Guard System Manager v7.3 or earlier. These versions of Watch-
Guard System Manager include VPN Manager and use the Firebox as
a DVCP Server.
1 To connect to the System Status page, type https:// in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
50 WatchGuard Firebox X Edge