Watchguard Firebox X15 User Manual page 165

The Firebox Users New Group page appears.
3
In the Account Name text box, type the name of the new
group. This name must match the name of a group in the LDAP
directory.
This name must contain only letters, numbers, and the underscore (_)or
dash (-) characters. Spaces are not permitted.
4
In the Description text box, you can enter a description of the
group. This field is optional.
5 From the Administrative Access drop-down list, select the level
of Firebox X Edge administrative access to assign to the group.
You can select:
None - The members of the group have no access to Firebox X
Edge administration functions.
Read-only - The members of this group can see, but not
change, Firebox X Edge configuration and status.
Full - The members of this group have full Firebox X Edge
administrative privileges.
6 Use the Session maximum time-out text box to set the number
of minutes a user session started by a member of this group is
allowed to stay active. When this limit occurs, the Firebox will
close the session.
7 Use the Session idle time-out text box to set the number of
minutes a user session started by a member of this group can
stay idle before it is automatically closed by the Firebox.
User Guide
Using LDAP/Active Directory Authentication
151