Dial-Up Dns Settings; Dial-Up Settings - Watchguard Firebox X15 User Manual

Changing Your Network Settings

Dial-up DNS settings

If your dial-up ISP does not give DNS server IP addresses, or if you
must use a different DNS server, you can manually enter the IP
addresses for your DNS server:
1
Select the Manually configure DNS server IP addresses check
box.
2
In the Primary DNS Server text box, type the IP address of the
primary DNS server. If you have a secondary DNS server, type
type its IP address in the Secondary DNS server field.
3 Click Submit, or select a different tab to change more settings.

Dial-up settings

1 In the Dial up time-out field, enter the number of seconds
before time-out if your modem does not connect.
2
In the Redial attempts field, enter the number of times the
Edge will try to redial if your modem does not connect.
3
In the Inactivity time-out field, enter the number of seconds
before time-out if no traffic goes through the modem.
4 In the Speaker volume field, set your modem speaker volume.
5
Click Submit, or select a different tab to change more settings.
88 WatchGuard Firebox X Edge