Omron sysmac EtherNet/IP NJ Series Connection Manual page 41

7.4.2. Checking Sent and Received Data
Check that correct data is sent and received.
In this procedure, the output of the Driver is performed, which may have a risk
of unexpected operation of the devices connected to the Driver.
Ensure safety before you proceed with this operation check described here.
If you cannot ensure safety, do not proceed. When you perform this operation
check, make sure you complete all the steps and make the output of the Driver
safe.
If you change the variable values on a Watch Tab Page when Sysmac Studio
is online with the CPU Unit, the devices connected to the Controller may
operate regardless of the operating mode of the CPU Unit.
Always ensure safety before you change the variable values on a Watch Tab
Page when Sysmac Studio is online with the CPU Unit.
1
With Sysmac Studio, select
Watch Tab Page from the View
Menu.
2
The Watch (Project)1 is displayed.
3
Click Input Name in the Name
Column and enter the following
variables.
EIP002_OUT[2]
EIP002_IN[2]
4
Select the following display
formats for the variables set in
step 3.
EIP002_OUT[2]: Binary
EIP002_IN[2]: Binary
7．EtherNet/IP Connection Procedure
38