Omron sysmac EtherNet/IP NJ Series Connection Manual page 10

5．Applicable Devices and Device Configuration
Precautions for Correct Use
Contact ORIENTAL MOTOR CO., LTD. to obtain the EDS file specified on the previous
page before proceeding.
Please note that you need the EDS file relevant to your device. If you use models other than
the one specified on the previous page, contact ORIENTAL MOTOR CO., LTD and obtain
the relevant EDS file.
Precautions for Correct Use
Update Sysmac Studio to the version 1.25 or to a higher version. If you use a version higher
than the one specified, the procedures and related screenshots described in Section 7. and
the subsequent sections may not be applicable. In that case, use the equivalent procedures
described in this guide by referring to the Sysmac Studio Version 1 Operation Manual (Cat.
No. W504).
Additional Information
For information on the power supply specifications of the Controller, refer to the NX-series
NX102 CPU Unit Hardware User's Manual (Cat. No. W593).
Additional Information
For information on the power supply specifications of the switching hub, refer to the Switching
Hub W4S1-series Users Manual (Cat. No. 0969584-7).
Additional Information
For information on the power supply specifications of the Driver, refer to the αSTEP AZ
Series/Motorized Actuator equipped with AZ Series EtherNet/IP Compatible Driver USER
MANUAL (HM-60372E).
Additional Information
The system configuration in this guide uses USB for the connection between the personal
computer and the Driver. For information on how to install the USB driver, refer to the
website of ORIENTAL MOTOR CO., LTD.
7