Omron sysmac EtherNet/IP NJ Series Connection Manual page 36

7
Select Communications Setup
from the Controller Menu.
8
The Communications Setup
Dialog Box is displayed.
Check that the Direct
connection via Ethernet Option
is selected in the Connection
type Field.
Click OK.
9
Select Online from the
Controller Menu.
If a confirmation dialog box is
displayed, check the contents
and click Yes.
*The contents of the dialog box
vary depending on the status
of Controller. Check the
contents and click on an
appropriate button to proceed
with the processing.
10
When an online connection is
established, a yellow line is
displayed under the toolbar.
Additional Information
For information on online connections, refer to Section 6. Online Connections to a Controller
of the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
7．EtherNet/IP Connection Procedure
33