Omron sysmac EtherNet/IP NJ Series Connection Manual page 37

11
Select Synchronize from the
Controller Menu.
12
The Synchronization Dialog Box
is displayed.
Check that the data to be
transferred (e.g. NX102) is
selected.
Uncheck the box for Do not
transfer the EtherNet/IP
connection settings (i.e., tag
data link settings).
Click Transfer To Controller.
*After you click on the button,
the Sysmac Studio data will be
transferred to Controller, and
the data will be synchronized.
13
The dialog box on the right is
displayed. Confirm that there is
no problem, and click Yes.
A screen is displayed stating
"Synchronizing".
The dialog box on the right is
displayed. Confirm that there is
no problem, and click No.
*Do not return to RUN mode.
7．EtherNet/IP Connection Procedure
34