Honda HS828 Manual page 39

HS928
HONDA
HSS2B
3) Push the choke lever to the fully closed position (see directional
arrow in the illustration).
Move the throttle control lever to "START (CHOKE)" slowly, and
stop when the speed control lever and choke lever contact.
NOTE:
Push the choke lever toward the horizontal position.
4) Turn the adjusting screw
<D
to contact the speed control lever.
Return the adjusting screw
<D
to 1/8 - 1/4 turns from the
contact position.
5) Make sure that carburetor choke valve is fully closed when the
speed control lever is moved.
If the carburetor choke valve is not fully closed, adjust the
choke rod again from step 2).
6) Install the control cover, air intake cover and air cleaner cover.
Start the engine, and make sure the maximum engine speed
and standard idle speed are correct.
SPEED CONTROL LEVER
ADJUSTING SCREW (j)