Honda HS828 Manual page 38

HS928
<STANDARD IDLE SPEED>
6) Move the throttle control lever to "SLOW" position and adjust
the standard idle speed by adjusting screw
CD
as follow;
STANDARD IDLE SPEED: 2,100
±
150 min-
1
(rpm)
NOTE: __________________________________ __
~st
the choke rod after adjusting the maximum engine
~~~------------------------------~
2. CHOKE ROD ADJUSTMENT
1) Stop the engine and loosen the adjusting screw
0
to such an
extent that it is not removed.
2) Move the throttle control lever to "FAST" position.
Bend the choke rod at point A in order to make the clearance
between the speed control lever and choke lever 0 - 5 mm {0
~0.02
in).
HONDA
HSB2B
ADJUSTING SCREW (i)
I
ADJUSTING SCREW (i)
SPEED CONTROL LEVER
CHOKE
ROD