Honda HS828 Manual page 17

4. Snowblower lacks power.
111"
Make sure the hydrostatic trans-
mission does not overheat.
"
"
DOES NOT OVERHEAT
12)
Start the engine and check the
L
idle speed
j
IDLE SPEED IS STANDARD
~·
3) Check
that
the transmission
release lever is correctly positi-
oned and is not damaged.
GOOD
4) Check the hydrostatic transmis-
sion fluid level (P. 3-3).
GOOD
5)
Check the drive belt for wear.
I
GOOD
6) Check the clutch arm of the
hydrostatic transmission for
damage.
GOOD
5. Snowblower can not move at fixed speed
l1)
Start the engine and check the /
idle speed.
IDLE SPEED IS STANDARD
l2)
Check the hydrostatic transmis-
I
sian fluid level (P. 3-3).
1
GOOD
l3}
Check _the
check valve
for
I
damage
J
GOOD
HS928
HONDA
HSB2B
• Overheats.
--------.f4e~C:;hhe~c;k~a~n~d-a;;:ddiilt:u~s~t -;.;;a;;:c:;;h~p;;a;;rt-:o~ffl
the hydrostatic transmission.
• Idle speed is low
----~l!_'leei!A\;dl;j;:;us;;tt"tiih;;e;-;;:idji;le~s;;p;;e;;eddi(PP-. ,3~-5;;);-.
-jl
I
.,~~
..
00 , . - , • • •
,~,
rectly positioned.
• . • Set the transmission release
;aulty transmiSSion relese- lever to the
right side (self-
ever. propelled side).
Damaged transmission release
e
Hydrostatic transmission
fluid lever is low. -------.
1
lever.
l
. •
Replace the transmission
release lever With a new one.
• Fill with hydrostatic transmission
fluid to the upper level (P. 3-3).
• Check the hydrostatic transmis-
sion fluid for leak (P. 2-15).
e
Worn. - - - - -
~---1 •
Replace the drive belt with a new
one
• Damaged.
- - - - - - - - 1
Damaged clutch arm or hole of the
clutch arm spring pin.
• Replace the clutch arm of the
hydrostatic transmission.
• Internal faults in the hydrostatic
transmission.
Go to page 2-16.
e
Idle speed is low.
•I •
Adjust the idle speed (P. 3-5).
Hydrostatic transmission -----..
•
Fill with
hydrostatic
transmission
•
fluid to the upper level (P. 3-3).
fluid level is low.
•
Check the hydrostatic transmis-
sion for leaks (P. 2-15).'
• Damaged
Damaged check valve spring.
Damaged steel ball or the attaching
surface between the check valve
and the distributor.
•
Replace any damaged parts .
•
Internal faults in the hydrostatic
transmission. Go to page 2-16.
I