Other Useful Functions; Beep Tone Level Adjustment - Kenwood TM-732A Instruction Manual

MOTHER USEFUL FUNCTIONS
1. Dimmer (DIM)
The intensity of the display illumination can be set to
one of four levels (di thru d4, with di being the
brightest.) or off. (default is d2.)
1. Press the F key, then press the LOW/DIM key while
the F indicator is lit. The display will show which
intensity level is currently in use.
POWER zo
de
sa
ST OTS TONE TALT REV STEP MUTE ABC)
2. Select the desired value (d1 to d4) with the tuning
control or the UP/DWN key on the microphone.
3. To return to the normal frequency display press any
key or wait 10 seconds.
(©) The display intensity can be made one step brighter
for five seconds when you press a key or turn the
tuning control.
If you select d1, this function does not work.
1. Turn the POWER switch off.
2. Press and hold the F and LOW/DIM key, and turn on
the POWER switch.
Note
When the power is switched on, the displai intensity decreases 2
steps to extend the life of the lamp.
48
2. Beep Tone Level Adjustment
The beep can be set to one of eight levels (off to b7).
(default is b5.)
1. Press the F key for longer than a second, then press
the REV key while the F indicator is flashing. The
display will show which beep level is currently in use.
2. Select the desired value with the tuning control or
the UP/DWN key on the microphone.
When the beep is set to b7, the maximum beep
sounds.
LOW
DIM
3. To return to the normal frequency display press any
key or wait 10 seconds.