INITIALIZING MEMORY
If your transceiver seems to be malfunctioning,
initializing the transceiver may resolve the problem.
Remember that you need to re-program memory
channels after initialization. On the other hand,
initialization is a quick way to clear all memory channels.
While using the Channel Display or Transceiver Lock function,
Note:
you cannot do Partial Reset nor Full Reset.
VHF Band Defaults
VFO
Version
Frequency
U.S.A./
144.000
Canada
MHz
Europe/
144.000
General
MHz
UHF Band Defaults
VFO
Version
Frequency
U.S.A./
440.000
Canada
MHz
Europe/
430.000
General
MHz
Frequency
Tone
Step
Frequency
5 kHz
88.5 Hz
12.5 kHz
88.5 Hz
Frequency
Tone
Step
Frequency
25 kHz
88.5 Hz
25 kHz
88.5 Hz
■
Partial Reset (VFO)
Use to initialize all settings except the memory
channels, the Call channel, the DTMF channels, and
Memory Channel Lockout.
1 Press [VFO]+ POWER ON.
• A confirmation message appears.
2
1
• To quit resetting, press any key other than [VFO].
2 Press [VFO] again.
■
Full Reset (Memory)
Use to initialize all settings.
1 Press [F]+ POWER ON.
• A confirmation message appears.
2
1
• To quit resetting, press any key other than [F].
2 Press [F] again.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
23