Kenwood TM-732A Instruction Manual page 45

3. Tone Operation
Some repeaters require the use of a control signal to
activate the repeater. Several different methods are
Currently in use. In the United States sub-audible tones
are sometimes used, 38 different sub-audible
frequencies being possible.
IN EUROPE AND UNITED KINGDOM a 1750 Hz tone is
used in transmit.
Since this tone is required in Europe and the United
Kingdom a 1750 Hz tone encoder is included with
models delivered to these countries.
@ Tone Frequency Selection
Each band can be have different the Tone Frequencies.
1. Press the F key for longer than 1 second. The F
indicator will flash. Press the TONE key. The current
tone frequency will appear in the display.
f Ss
POWER
LOW
DIM
1°}
2. Rotate the Tuning control or press the microphone
UP/DWN key to select the desired tone frequency.
3. Press any front panel key or wait 10 seconds to
return to thr normal frequency display.
Tone Frequency (Hz)
67.0 | 82.5 | 97.4 | 114.8 | 136.5 | 162.2 | 192.8 | 233.6 |
71.9 | 85.4 | 100.0 | 118.8 | 141.3 | 167.9 | 203.5 | 241.8
74.4 | 88.5 | 103.5 | 123.0 | 146.2 | 173.8 | 210.7 | 250.3
77.0 | 91.5 179.9 107.2 : 127.3 | 151.4 218.1 |
| | 79.7 | 94.8 | 110.9 | 131.8 | 156.7 | 186.2 | 225.7 |
@ Tone Operation
Press the TONE key and select the desired Tone mode.
When the T indicator appears in the display the
transmitter will transmit the desired tone. Tone signals
can be transmitted.
When no Tone indicator is on, the radio will not make
use of either tone feature.
T CT(CTCSS)
~
No indicator
foe Tage XO
45