Kenwood TM-732A Instruction Manual page 17

Basic functions performed with the F key
Press the F key momentarily and then, within 10
seconds, press one of the following keys:
POWER
LOW
DIM
Press and hold the F key for 1 second or longer, then
press one of the following keys:
Key Function Key Function Page
F
VFO/MPV Copy memory data into the VFO. VFO/MPV Change Scan Hold/Resume mode. 42
Write data into memory. MR/M Memory channel lockout. 43
Inhibit all keys except the PTT key and Turns the Automatic Power Off function
MHz/LOCK the F+MHz key. MHz/LOCK on and off. 49
bet
CALL Change call channel data. CALL Change hangup time. 58
SHIFT/DTSS | Change DTSS/Page data.
SHIGS/DTSS |g oe
hem loner Gare
61, 66
3 code. :
TONE/T.ALT Turns the Tone Alert function On and ;
: OFF. TONE/T.ALT | Tone frequency selection. 45, 59
REV/STEP Change the VFO Step size. REV/STEP Beep tone level adjustment. 48
MUTE/ABC Turns the Automatic Band Change MUTE/ABC | Cross Band Repeater ON/OFF control. 58
function ON and OFF. : :
LOW/DIM Selects noise activated squelch or S- 33
Selects the display lamp intensity. Meter squelch.
Receive signals in the same band C. SEL Selects the external speaker receiver 32
_ _ | simultaneously. input.
| BAND SEL| Band ON/OFF control. 49 |
17