Kenwood TM-732A Instruction Manual page 29
Hide thumbs
Also See for TM-732A:
- Service manual (82 pages) ,
- User manual (80 pages) ,
- Instruction manual (79 pages)
Table of Contents
Advertisement
Mi MEMORY BASICS
"Te Ski? A Chanwe} SealTape aby
1. Storing Information into Memory
5. Press the MR key within 10 seconds of selecting the
¥.
Pate
-Offcat
o r
—
memory channel number. The F indicator and
1-1. Normal
Repeater Offset
or —
memory channel number will turn off. This signals
Simplex Channel Entry
that the data has been properly stored in memory.
Note: The TM-732A has been preprogrammed to
automatically select the proper offset according to the
ARRL Bandplan.
For example, 145.020 MHz is put into memory channel 5.
{
°
1. Press the upper BAND SEL key.
2. Select the desired receiver frequency, tone
information etc. (For example 145.020MHz)
POWER
LOW
OM
ee
SRA
—s: a
(CE)
__SHIFTOTSS TONE TALT
REV STEP MUTE ABC)
=
—
1-2.
Odd Split Memory Channel
For example,
put a receive frequency of 145.020
MHz
and transmit
3. Press the F key momentarily. The F indicator will
frequency of 145.620 MHz into memory channel 10.
light on the display, and
a memory channel number
1. Press the upper BAND SEL key.
will appear.
2. Select the desired receiver frequency, tone
4. Select any memory channel using the Tuning control
information etc. (For example 145.020MHz)
or microphone UP/DWN keys.
(For example: CH5)
5.000
— 8007
HE leet ME TONE TALT REV STEP MUTE ABC,
O' &
[o)
Taya T 7
Advertisement
Table of Contents
