Table of Contents
Advertisement
The following operation is necessary when changing the FastPAD 2 power assembly board, front panel board, or changing versions of the
FastPad software.
Before programming check the software is in the local language and change if necessary.
2.1 SETTING THE SOFTWARE LANGUAGE
- Select the "SERVICE" menu
- Select the "Client parameters" screen
- Enter the password « CHEF »: « Permanent » (lower or uppercase)
- Validate "V": When finished, if the code is correct access the menu if not re-enter the PIN number.
- Modify the programme language if necessary (Fr : French by default
* Select the zone of the value to be changed
* Adjust the value using the coder knob
2.2 BRAISING PAN PARAMETERS
- Select the "SERVICE" menu
- Select the "Technician parameters" screen
- Enter the password: « SAVB »
- Validate "V": When finished, if the code is correct access the menu if not re-enter the PIN number.
- Reconfigure the appliance
* Select the zone of the value to be changed
* Adjust the value using the coder knob
F49572 (07-23)
Page 6
2.
PROGRAMME SETTINGS
VULCAN
A division of ITW Food Equipment Group LLC
P.O. Box 696
Louisville, KY 40201
3VE490072EM – 06/23
Advertisement
Table of Contents
