Kohler KD62V12A Operation And Maintenance Manual page 95

Component
SL0-1021 Engine (idle speed)
SL0-2011 Oil system
SL0-3011 Cooling system
SL0-4011 Fuel system
SL0-5011 Air intake system
Tab. 27: Service level 0 — COP — Daily maintenance - Version: 2023/07-03
KD62V12A 33521061401_1_1 EN_US
2023-10
Service
Schedule
Type
Observe engine running at idle.
Record and report any anomaly. For example:
leak, faulty parameter, unusual noise, unusual
- 1D x -
vibration, unusual exhaust gas color.
(→ 5.6.2 Inspecting engine running at idle
speed — SL0-1021, p. 123)
Task is performed when engine is stopped.
Check engine oil level. Fill up with oil if needed.
Check prelubricating oil pump operation at
- 1D x - engine start (displayed pressure).
Take corrective action if defect is present.
(→ 5.7.1 Inspecting oil system overall condition
— SL0-2011, p. 138)
Task is performed when engine is stopped.
Check coolant level. Fill up with coolant if
needed.
Inspect (including charge air cooler).
Check dewatering bores on air admission lines
- 1D x -
(free of debris, free of coolant).
Check relief bores on tandem coolant pump
(free of oil, free of coolant).
(→ 5.8.1 Inspecting cooling system overall
condition — SL0-3011, p. 153)
Task is performed when engine is stopped.
Check fuel level. Fill up with fuel if needed.
Replace pre-filter insert if clogged or defect is
present.
Drain water from fuel pre-filter (off-engine).
- 1D x - Check differential pressure gauge of fuel pre-
filter / indicator for check monitoring (when
fitted).
Take corrective action if defect is present.
(→ 5.9.1 Inspecting fuel system overall condi‐
tion — SL0-4011, SL0-5311, p. 159)
Task is performed when engine is stopped.
Replace air filter if needed.
Inspect air-ducting and exhaust gas turbo‐
- 1D x - charger when filter is found clogged, damaged,
or improperly fitted.
(→ 5.10.1 Inspecting air intake system overall
condition — SL0-5011, p. 165)
© 2023 by Kohler Co. All rights reserved.
Maintenance
Maintenance information
Task description
95