Kohler KD62V12A Operation And Maintenance Manual page 132

Maintenance
1000 - Base engine
Step 8
u Rotate the crankshaft in direction of rotation until the turning device faces flywheel marking
2.
u Check the valve clearance for cylinders A1, A2, and B2.
valve clearance, p. 133)
Step 9
u Rotate the crankshaft in direction of rotation past flywheel marking 6.
Step 10
u Rotate the crankshaft in direction of rotation past flywheel marking 3.
Step 11
u Rotate the crankshaft in direction of rotation until the turning device faces flywheel marking
4.
u Check the valve clearance for cylinders A4, B4, and B6.
valve clearance, p. 133)
Setting valve order (alternative method)
Information
There is a marking on the flywheel to set the valve order for checking clearance.
The marking may be illegible.
If the marking is illegible, set the valve order using the following alternative method.
Overlap TDC*
Injection TDC**
* Cylinder to be set to overlap TDC
** Cylinder to check
Tab. 32: Valve check order
u Set cylinder to overlap TDC position.
u Check valve clearance of matching injection TDC cylinder.
p. 133)
u Repeat procedure for all cylinders.
132
A6 B5 A5 B3
A1 B2 A2 B4
© 2023 by Kohler Co. All rights reserved.
(→ tab. 33, p.
(→ tab. 33, p.
A3 B1 A1 B2
A4 B6 A6 B5
(→ Checking valve clearance,
KD62V12A 33521061401_1_1 EN_US
134). (→ Checking
134). (→ Checking
A2 B4 A4 B6
A5 B3 A3 B1
2023-10