Harmonist: About The User Scale - Roland GP-100 Owner's Manual

Harmonist: About the User Scale
Section 5 Appendix
Here's how to make harmony settings when the Harmonist is set
to "Mode:Harmony," "Scale:User."
If setting the scale to "Preset" (preset scale) does not produce the
desired harmony, you can create harmony based on the scale
settings you specify here (user scale).
(Procedure)
1 Press the [UTILITY] button several times until the parameter
you wish to set appears in the display. Each time you press the
button you will cycle through the following items.
* When all items have been cycled through, you will return to the
original display.
* While making Utility function settings, the button indicator will be
lit.
<Function Settings>
«MIDI-Related Settings»
«Harmonist Settings»
Specify a user scale for Harmonist
«FC-200 Settings»
2 Rotate the PARAMETER knob until the display shows the
harmony and input note scale degree of the preset scale that
you wish to modify.
Inrut.
4th it ?
Hat".
++
Нагтопу
Input Scale
* As you rotate the PARAMETER knob, the display will successively
show the input note scale for each harmony.
* If you press the PARAMETER knob as you rotate it, only the
harmony will change.
3 Usethe VALUE knob to modify the Pitch Shift amount (-24—
+24) of the effect sound.
Input
4th i+ 7
Har,
+5th
the amount of
pitch shift
* At the factory settings, the pitch shift amounts of the user scale are
the same as the pitch shift amounts of the preset scale. When
setting the user scale, you need only make the necessary changes
— where it diverges from the preset scale.
* Modifying the pitch shift amounts for harmony and input note
scale (with respect to the preset scale settings) will affect the pitch
shift amounts as follows.
Har. Inrut
+ith — 4th
4 Repeat steps 2—3 to complete the user scale settings.
5 Press the [EXIT] button to end the procedure.
65