The Global Function; Parameters Of The Global Function - Roland GP-100 Owner's Manual

The Global Function
Section 2 Modifying various settings
The GP-100 has a Global function that allows you to temporarily
modify the settings of all Patches in the same way. The Global
function allows you to easily make adjustments to match tempo-
rary changes in your equipment or playing situation, without
affecting the contents of each Patch.
* Settings you make in the Global function do not affect the contents of
the Patches.
(Procedure)
1,5 2 3
OO
PrtAMe mosa томат отту
C coca cS
werk вит. мател ағғаст
5
1 Press the [GLOBAL] button. The button indicator will light,
and the parameters of the Global function will appear in the
display.
2 Rotate the PARAMETER knob until the parameter you wish to
modify appears in the display.
З Use the VALUE knob to modify the setting.
4 Repeat steps 2—3 to adjust the parameters of the Global
function.
5 Press the [GLOBAL] or [EXIT] button to end the procedure.
Parameters of the Global Function
Low EQ: -20 dB— +20 dB
Low Ei
Adjusts the low frequency range tone.
* This adjusts the tone regardless of the Equalizer On/Off setting of each
Patch.
High EG: -20 dB— «20 dB
High EH
Adjusts the high frequency range tone.
* This adjusts the tone regardless of the Equalizer On/Off setting of each
Patch.
Threshold Level: -20 dB— +20 dB
Threshold
Level
HdE
This is a -20 dB—+20 dB adjustment to the Threshold Level of the
Noise Suppressor included in each Patch. If you switch to a
different guitar, it is convenient to adjust this setting to match the
output level of the guitar.
* This setting will have no effect on Patches in which the Noise
Suppressor is turned off.
Reverb Level: 0%—200%
Eeuerb
Less]
This adjusts the Reverb Level of the reverb in each Patch by 096 —
200%. To obtain a more effective reverb, adjust this so you have
the Reverb Level matched with the physical reverberation in the
space where performing.
* This setting will have no effect on Patches in which the Reverb is turned
off.
OUTPUT Channel
üOnTFIIT Channel
Patch
This sets the output channel of the GP-100. Normally, the output
channel specified by each Patch will be used. However, this
setting allows you to override the output channel assignments for
all Patches, and enforce a different output path — useful at times
such as when your amplifier configuration changes.
Patch: The output specified by the Patch will be used.
OUTPUT A: "OUTPUT A" will be used regardless of the
setting of the Patch.
OUTPUT B: "OUTPUT B" will be used regardless of the
setting of the Patch.
OUTPUT A&B: Both "DUTPUT A" and "OUTPUT B" will be
used regardless of the setting of the Patch.
25