Tuner Settings; Nennt - Roland GP-100 Owner's Manual

Section 1 Try out the GP-100
Tu
ner Settings
The GP-100's tuner allows you to set the standard pitch and the
volume that will be used during tuning.
(Procedure)
14
4 1 2
zese gő
rann mey "АлАМЕТЕМ ЧУЙ
ooo cs
wert өп_ мия ect
cC
Se
4
With the tuner page displayed, rotate the PARAMETER knob to
select the parameter you wish to modify.
<Standard Pitch>: 435—445 Hz
TUHER Pitch
A = 44üHz
"Standard pitch" is the frequency of the A4 note (middle A
on a piano) that is used as a standard to which all other
notes aretuned. The GP-100 allows you to set the standard
pitch over the range of 435—455 Hz.
«Volume During Tuning»: 0—100
TUHER Level
ay
Set the volume that will be used during tuning.
Use the VALUE knob to modify the setting.
Repeat steps 1 and 2 to make tuner settings.
Press the [TUNER] or [EXIT] button to endthe procedure. (The
Play page will reappear.)