Utility Function Parameters - Roland GP-100 Owner's Manual

Section 2 Modifying various settings
The following pages explain the GP-100's Utility functions, which
allow you to configure the unit for the setup you are using.
(Procedure)
1 Press the [UTILITY] button several times to bring up the
parameter you wish to set. Each time you press the button, the
following items will be successively selected.
* When all items have been cycled through, you are returned to the
original display.
* While making Utility function settings, the button indicator will be
lit.
«Function Settings»
OUTPUT A Level
+44Ем
Make basic settings that affect the entire GP-100.
<MIDI Settings>
MIDI Channel
Channel =
Make settings related to MIDI.
<Harmonist Settings>
Har, Inrut
Tonic Tonic : &
Set the user scale for the Harmonist function.
«FC-200 Settings»
FOZH CTL Pedal
Мамек зе
Make settings for the FC-200 MIDI foot controller (ор-
tional) remotely from the GP-100 via MIDI.
2 Rotate the PARAMETER knob until the parameter you wish to
set appears in the display.
3 Use the VALUE knob to modify the setting.
4 Repeat steps 1—3 to set the desired Utility parameters.
5 Press the [EXIT] button to end the procedure.
*For details on «MIDI settings» refer to "MIDI Utility function settings"
(p. 53).
* For details on «Harmonist settings» refer to "Harmonist: About the
User Scale» (p. 65).
* For details on «FC-200 settings» refer to "Changing FC-200 settings
from the GP-100" (p. 62).
Utility Function Parameters
«Function Setting»
OUTPUT A Level: -10 dBm, +4 dBm
OUTPUT A Level
+46
Selection for the nominal output level of OUTPUT Jack A.
OUTPUT B Level: -10 dBm, +4 dBm
QUTPUT B Level
*4dEn
Selection for the nominal output level of OUTPUT Jack B.
SEND 1 Level: -10 dBm, +4 dBm
SEND 1 Level
-lüdBn
Selection for the nominal output level of the SEND 1 Jack.
RETURN 1 Level: -10 dBm, +4 dBm
КЕТПЕН 1 Level
-ldBm
Selection for the nominal output level of the RETURN 1 Jack.
SEND 2 Level: -10 dBm, +4 dBm
SEHD Level
-iüdBm
Selection for the nominal output level of the SEND 2 Jack.
RETURN 2 Level: -10 dBm, +4 dBm
RETURN 2 Level
-ldEn
Selection for the nominal output level of the RETURN 2 Jack.
27