Settings For The Connected Amps - Roland GP-100 Owner's Manual

Section 1 Try out the GP-100
З Use the VALUE knob to modify the value.
4 Repeat steps 2—3 to set the nominal input/output levels for
each INPUT/OUTPUT jack.
5 Press the [EXIT] button to end the procedure. (You will be
returned to the Play page.)
Settings for the Connected Amps
Specify the type of amp and speaker you are using (i.e., that is
connected) for each output channel.
(Procedure)
1,5 2 3
pes BEES ралу ES "ДА" A
ые ш OO
1 Press the [GLOBAL] button. The button indicator will light,
and the display will show the Global parameters.
2 Rotate the PARAMETER knob until the parameter you wish to
modify appears in the display.
<Amp Type>
Arie oe Ц
Arie pee Us
Tube: A tube amplifier
Solid State: А solid state amplifier
10
<Speaker Type>
SP Being Used
Built
SF Being U
Bu
ser
ilt
Built in Stack
|
[35553155559 ро a] С) e
JC-120 etc. Speaker Box
Built In: Built-in type speakers
Stack: Stack type speakers
«Speaker Color»
SF Calor.
SP Colg jp
Adjust: The tone color will be adjusted for output as
appropriate for the type of speaker box that is
connected.
Straight: The tone color of the preamp will be output
without change, regardless ofthe typeof speaker
box that is connected.
З Use the VALUE knob to modify the setting.
4 Repeat steps 2—3 to make settings for the amp and speaker
type.
5 Press the [GLOBAL] or [EXIT] button to end the procedure.