Switching Effects On/Off; Switching Effects On/Offfromthe Front Panel; Switching Effects On/Off From A Foot Switch - Roland GP-100 Owner's Manual

Section | Try out the GP-100
Switching Effects On/Off
You can switch the effect sound on/off. When an Effect is off, the
input sound will be output without modification.
* Effect On/Off can be changed to a Mute On/Off function. For details
refer to "EFFECT off" (p. 28).
Switching Effects On/Offfromthe Front
Panel
n,
PMLAMP GLOBAL Тимей — UttutY PARAMETER NODE
CM coc
Ban O матан © тест
ER pm. жыз gm
The [EFFECT] button acts as a toggle, switching the effect either
onor off with each press. When switched off, the button indicator
will be dark.
Switching Effects On/Off from a Foot
Switch
If a separately available BOSS FS-5U or FS-5L foot switch is
connected, you can switch effects on/off in the following two
ways. The same as when you press the [EFFECT] button, the button
indicator will be dark when switched off.
Using the EFFECT REMOTE/EXP PEDAL Jack
This jack can be used as the Effect On/Off jack. When an FS-5L is
connected, foot switch operations will switch Effect on/off.
EFFECT REMOTE/
EXP PEDAL
О а ка EFFECT
— = REMOTE
Foot Switch FS-5L
(Optional)
* If you wish to use this function, make the following settings. For
details refer to "EFFECT REMOTE/EXP PEDAL Jack" (p. 28).
<UTILITY>
EFFECT/EXP PEDAL: EFFECT REMOTE
12
Using the control jack
This jack can also be used as the EFFECT On/Off jack. When an FS-
5U or FS-5L is connected, foot switch operations will switch the
effect on/off.
CONTROL
y2
Q-—- em [E] onore
Foot Switch
FS-5U/5L(Optional)
* If you wish to use this function, make the following settings. For
details refer to "CONTROL 1/2 Jack" (р. 28).
«UTILITY»
CONTROL 1 Jack:
or
CONTROL 2 Jack:
«Control Assign»
Target: EFFECT On/Off
Source: CONTROL 1 or CONTROL 2
(set to match UTILITY)
Source Mode: Toggle (:FS-5U) or Normal (:FS-5L)
(set to match the foot switch that is connected)
(Source Act.Range lo 0)
(Source Act.Range Hi 127)
Assignable
Assignable
Switching Effects On/Off from an FC-
200 MIDI Foot Controller
if an FC-200 MIDI foot controller (optional) is connected, you can
use pedal operations to switch effects on/off. For details refer to
"GP-100 Operation Using the FC-200" (p. 58).
Switching Effects On/Off by MIDI
Messages
MIDI Control Change messages can be used to switch effects on/
off. For details refer to "Control Assign Settings" (p. 21).