Table of Contents
Advertisement
MPS-10
- Appendix
Error messages
Error messages
Cancelled
You pressed the EXIT button during an operation that could be canceled.
An error has occurred when writing to or reading from a file in internal memory
Store Error
or on a USB flash drive.
Import Error
If read/write errors occur frequently, use a different USB flash drive. Contact
Export Error
our service representative if you encounter errors after several unsuccessful
Setup Error
tries of writing to or reading from internal memory.
Move Error
An error occurred when writing to or reading from a file in internal memory.
Contact our service representative if you encounter errors after several unsuc-
Delete Error
cessful tries.
An error has occurred when loading the parameter data used by the system.
Data Load Error
Turn the power off and on again. If the error still occurs after cycling the power,
contact our service representative.
A system communication error has occurred.
System Error
Turn the power off and on again. If the error still occurs after cycling the power,
contact our service representative.
There isn't enough free space in the internal memory to execute the operation
Memory Full
(Import SAMPLE, RECORDER, etc.).
Delete any unnecessary SAMPLE data from internal memory.
No Data Exists
The track you specified when executing Export to WAV file contains no data.
There are no files present in the folder you specified with the Import SAMPLE
No Data File Exists
operation that can be imported.
The system file for updating is incorrect.
Invalid Data File
If the error still occurs after copying the system file again, use a different USB
flash drive.
An error occurred when you tried to calibrate a pedal.
Calibration Error
Try calibrating again.
An error occurred when formatting the USB flash drive.
Format Error
If an error still occurs after trying this several times, use a different USB flash
drive.
The data file could not be created or stored, due to insufficient memory
remaining on the USB flash drive.
External Drive Full
Delete any files on the USB flash drive that you do not need.
The internal memory protect feature is on.
Memory Protected
Turn Memory Protect off in the Setup page of UTILITY.
The SAMPLE data format is not supported for the file you specified in Import
SAMPLE.
Unsupported File
Supported SAMPLE data formats are WAV or AIFF (16-bit, mono/stereo, 44.1/48
kHz, up to 60 minutes long).
Cause of error and how to solve
98
Advertisement
Table of Contents
