Korg MPS-10 Owner's Manual page 27

MPS-10
- Editing the KITs
With the cursor positioned at "Template "One Shot"", press the ENTER button again to select it.
3
Press the EDIT button to access the INST EDIT page. The Velocity page is shown.
On this screen, move the cursor to "V Response" and press the ENTER button to disable "V Response".
With this setting, the volume does not change according to how hard you strike the pads.
4
Turn the METRONOME knob to show the Block Edit page.
Turn the VALUE knob to move the cursor to "A" and press the ENTER button to select it.
5
With the cursor positioned at "SAMPLE", press the ENTER button. The SAMPLE SELECT page
like the one below is shown.
Only the SAMPLEs in the currently selected category are listed on this page.
27