Table of Contents
Advertisement
MPS-10
- Playing the MPS-10
2
Press the ENTER button (VALUE knob) to highlight the KIT number.
3
Turn the VALUE knob to select the KIT number.
When you switch to a different KIT, the KIT number and name blink. This means that you haven't yet
switched to the new KIT.
4
Once you press the ENTER button (VALUE knob), the KIT number you selected is confirmed.
Tip: There are 200 KITs included on the MPS-10. The first 100 KITs are preset KITs, and the last 100 KITs are user
KITs.
What you can do on the top page
On the top page, aside from selecting KITs you can select looper tracks, configure the functions for
the CC pads, select the set lists and so on.
By pressing the SW MODE button, you can change the functions called up by the TRACK 1–4 buttons
(a total of three types).
Here's an explanation of the operations you can access when the top page is shown.
LOOPER mode
The MPS-10 features a four-track looper. ( p. 31, "Using the Looper function")
When in Looper mode, the TRACK 1–4 buttons operate as looper tracks.
Large TRACK buttons are available on the bottom part of the control panel, giving you smooth access
to the tracks while you're playing.
16
Advertisement
Table of Contents
