Sample / Recorder Setup - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:
Table of Contents

Advertisement

MPS-10
- Parameter guide
PAD Level ....................................................................................................0...100
Sets the volume for each pad when recording.
AUX Level....................................................................................................0...100
Sets the input level of the external input to be recorded.
Note: The available LINE IN/MIC IN settings can be configured in UTILITY.

SAMPLE / RECORDER Setup

Use this page to make detailed settings when recording SAMPLEs.
Auto Start .................................................................................................. On, Off
Turns the function on/off that automatically begins the recording.
This works in conjunction with "Auto Start" on the RECORDER page.
Trigger Source .................................................................. PAD, AUX, PAD&AUX
Sets the trigger used to automatically begin recording.
AUX Threshold.............................................................................................1...100
If AUX or PAD&AUX is selected in Trigger Source above, this sets the AUX INPUT level at which
recording automatically starts.
Auto Stop ................................................................................................... On, Off
Turns the function on/off that automatically ends recording.
This works in conjunction with "Auto Stop" on the RECORDER page.
Measure .................................................................................................001... 999
Sets the number of measures to record before automatically stopping.
Beat..................... 1/2...24/2, 1/4...24/4, 1/8...24/8, 1/8t...24/8t, 1/16...24/16
Sets the beat (time signature) when the recording is set to stop automatically.
BPM...............................................................................................30.00...300.00
Sets the BPM used when the recording is set to stop automatically.
Note: You can't configure the Measure, Beat and BPM settings in a way that would make the recording time exceed
60 minutes.
Sub Out....................................................................................................... On, Off
For the pads that are set to Sub Out output during recording, this sets whether to include the AUX In
output.
Metronome ................................................................................................. On, Off
Sets whether the metronome automatically starts during recording.
63

Advertisement

Table of Contents
loading

Table of Contents