Table of Contents
Advertisement
MPS-10
- Turning the power on/off
Turning the power on/off
Connecting the AC adapter
1
Connect the DC plug of the included AC adapter to the DC 9V jack on the rear panel.
2
After connecting the DC plug, hook the AC adapter cord onto the cord hook.
Make sure to use the included AC adapter. Using a different AC adapter may cause a
malfunction or other issues.
Do not use excessive force when pulling the cord off the hook. Doing so may cause damage to
the plug.
3
Connect the AC adapter to an AC outlet.
Be sure to use an AC outlet of the correct voltage for your AC adapter.
Turning the power on
1
Turn the MAIN VOL. and PHONES knobs on this unit all the way down (counterclockwise) to
minimize the volume.
Make sure that the volume on any external devices that are connected (such as mixers or pow-
ered monitor speakers) is turned down and that the power is turned off.
2
Press the
(Power) button on the MPS-10.
After the opening screen is shown on the display, the KIT name is shown.
This page is called the top page. ( p. 15, "Viewing the top page")
Tip: The KIT last selected before the power was turned off is shown.
3
Turn on the external output devices connected to this unit.
Turn on the power of the external output devices that are connected to the MPS-10's output jacks
(MAIN OUT L (MONO), R), such as powered monitor speakers or mixers.
4
Adjust the volume to the optimal level.
Adjust the MAIN VOL. knob on this unit, and set the volume on your external output devices to a
suitable level.
11
Advertisement
Table of Contents
