Import & Export / Utility Data - Korg MPS-10 Owner's Manual

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Parameter guide

How to export to a WAV file

You can save the audio data that's recorded in a specified track to a USB flash drive as a WAV file.

Turn the METRONOME knob to switch to the "to WAV file" page.

Move the cursor to "LOOPER Track" and press the ENTER button, then select the track you

want to export.

Note: You can't export all four tracks at the same time.

Move the cursor to "Name" and press the ENTER button to show the rename page. ( p. 24,

Note:

"Using the Name dialog box (how to change the name)")

Move the cursor to "Execute" and press the ENTER button. A message is shown on the page,

confirming whether you want to export the WAV file for the selected track. Press the ENTER

button to execute. Press the EXIT button to cancel.

Note: If there is already a file with the same name when you press "Execute", the message shown below appears.

To overwrite the existing data, press the ENTER button. To go back and rename the data, press the EXIT button.

Note: To delete the data that's saved, delete the WAV file with the name you specified in "Name," located in the

"SAMPLE" subfolder of the "MPS_10" folder on the USB flash drive.

Import & Export / UTILITY Data

The UTILITY data is a set of data that contains the setting parameters for the Setup, SET LIST and

Function Assign screens.

Table of Contents