Function Assign / Foot Sw & Pedal - Korg MPS-10 Owner's Manual

MPS-10
- Parameter guide
LOOPER Start/Stop ........................................ PAD1...PAD10 / A,B,C,D / Pedal
Sets the pad that starts/stops the looper.
When you strike the pad that's specified here and multiple tracks are already playing, all tracks stop.
When you strike the pad while multiple tracks are stopped, all tracks begin playing.
Tap Tempo ........................................................ PAD1...PAD10 / A,B,C,D / Pedal
Sets the pad that adjusts the BPM via tap tempo.
SOUND OFF ..................................................... PAD1...PAD10 / A,B,C,D / Pedal
Sets the pad that works the same as the SOUND OFF button on the panel.
Function Assign / Foot SW & Pedal
On this screen, you can assign the following functions to the two foot switches and the expression
pedal of the MPS-10.
Foot Switch
Foot SW1,2....................................... Off, KIT+, KIT-, IFX1 On/Off, IFX2 On/Off,
LooperPlay Start/Stop, LooperRec Start/Stop, Tap Tempo, SOUND OFF
Use this to set which function to assign to the connected foot switches.
Polarity ..............................................................................................................-, +
Lets you change the polarity of the function.
Set this according to the foot switch you're using.
74