Korg MPS-10 Owner's Manual page 46

Hide thumbs Also See for MPS-10:

Table of Contents

MPS-10

- Parameter guide

CC PAD 1...4 ..................................................................................... Off, -24...+12

Sets the transpose value (in semitones) that's used when you strike the CC pads.

Transition ....................................................................................................0...100

Sets the speed at which the parameter value changes when you strike a CC pad.

Larger values make the values change slower.

Note: Sounds that are already playing do not change in pitch; only the pitches of new sounds that are played

change.

NOTE (Note Delay)

This function automatically repeats the note you played once, only for the specified length.

Note Delay On/Off ..................................................................................... On, Off

Enables/disables the Note Delay function.

Note Delay CC PAD1...4 ..................................................... Off, 8, 16, 32, 64, Hi

Sets the note value for the repeating notes that play when you strike the CC pads. The tempo is syn-

chronized to the current BPM setting.

Note Delay Length ..........................................................................................1...4

Specifies the length of the repeated notes, in quarter note units. The tempo is synchronized to the

current BPM setting.

Note Delay Rhythm Pattern ..........................................................................1...4

You can set how the notes repeat, using one of four patterns. The available patterns are XXXX, XOXX,

XXOX and XXXO (with "X" meaning that a note plays, and "O" meaning a rest).

MFX

You can apply an offset to two of the parameters included in the MFX. This offset changes according

to where you strike the pads.

Note: This is disabled if the MFX for Main FX is set to "Off". Select the appropriate type and then set the MFX to

"On".

Tip: Press the EDIT button to jump to the MFX page of Main FX.

FX ................................................................................................................ On, Off

Enables/disables the FX function.

Table of Contents