Sampler; Sampling - Korg MPS-10 Owner's Manual

MPS-10

- Sampler

Sampler
On the MPS-10, you can sample the sounds of the built-in sound generator as well as the external
input audio signals from the LINE IN and MIC IN jacks, and assign them to the pads.

Sampling

Press the SAMPLE button to enter SAMPLE mode.
If you're not in SAMPLE mode, press the SAMPLE button.
Select "RECORDER" or "SAMPLE" with the VALUE knob, and press the ENTER button to go to the
RECORDER or SAMPLE page.
On the RECORDER and SAMPLE pages, the track 1–4 buttons operate as transport buttons.
Track 1 button: press once to go back a little, press and hold to rewind, or press twice to go back to
the beginning (while stopped)
Track 2 button: play/record stop
Track 3 button: play/record start
Track 4 button: press once to go forward a little, press and hold to fast-forward
Aside from sampling, in SAMPLE mode you can also edit the existing user samples.
Note: You can't edit the preset samples.
37