Mixers And Multi-Track Recorder Setup; Using The Digital I/O - Korg A1 Owner's Manual

2 Mixers and Multi-track Recorder Setup

Make sure that the A1's POWER switch is OFF before making any connections.

3 Using the Digital I/O

Make sure that the A1's POWER switch is OFF before making any connections.
Set to match connected equipment.
The A1's DIGITAL AUDIO IN function can only be used with digital equipment using
a 48-MHz sampling frequency. The A1's Digital In LED will not light and there is no
sound when connecting a unit with a sampling frequency other than 4S kHz. When
using the DIGITAL AUDIO IN jack, set the DIGITAL INPUT parameter to "ENABLE" in
the GLOBAL UTILITY MODE.
Caution: There is no need to conned both the digital IN and OUT cables when
connecting a DAT machine to the A1, If both cables are connected, a feedback loop
may occur.
IMPORTANT: Use a commercially available video cable for the DIGITAL IN and OUT
jacks.
Set to match connected equipment.