Settings
Cautions during connection
• Before connecting this module to the pads, place this module on a rack or stand.
• Use the dedicated breakout cable that is included, in order to connect the module to the
PureTouch Pad.
• Connect the additional pads 1/2/3 to the ACC IN (TOM4/ACC1, ACC2, ACC3) jacks on
the module using the cables included with the additional pads (optional).
• Make sure that the cable is long enough when connecting.
• Arrange the cables so that they do not get pinched by the pedal or stand.
Steps for connecting
1. Mount each pad and the module on the rack.
Refer to "How to Assemble"(a separate sheet).
2. Connect the included breakout cable to the module.
3. Connect each cable coming from the breakout cable to each pad.
While checking the marker on each cable, connect each pad carefully without getting the
connections mixed up.
Connections
Mixer
Powered monitor speaker
Headphones
Preparations
Included AC adapter
Audio player
Breakout cable
CR
HH
HHC
TM1
TM2
SN-A
SN-B
KICK
- 8 -
Additional pad 3
Additional pad 2
Additional pad 1
RD-B
RD-A
TM3